Add default input.conf mpv config

home/.config/mpv/input.conf.default

@@ -0,0 +1,180 @@
+# mpv keybindings
+#
+# Location of user-defined bindings: ~/.config/mpv/input.conf
+#
+# Lines starting with # are comments. Use SHARP to assign the # key.
+# Copy this file and uncomment and edit the bindings you want to change.
+#
+# List of commands and further details: DOCS/man/input.rst
+# List of special keys: --input-keylist
+# Keybindings testing mode: mpv --input-test --force-window --idle
+#
+# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
+#
+# Strings need to be quoted and escaped:
+#   KEY show-text "This is a single backslash: \\ and a quote: \" !"
+#
+# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
+# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
+#
+# The default keybindings are hardcoded into the mpv binary.
+# You can disable them completely with: --no-input-default-bindings
+
+# Developer note:
+# On compilation, this file is baked into the mpv binary, and all lines are
+# uncommented (unless '#' is followed by a space) - thus this file defines the
+# default key bindings.
+
+# If this is enabled, treat all the following bindings as default.
+#default-bindings start
+
+#MBTN_LEFT     ignore              # don't do anything
+#MBTN_LEFT_DBL cycle fullscreen    # toggle fullscreen
+#MBTN_RIGHT    cycle pause         # toggle pause/playback mode
+#MBTN_BACK     playlist-prev       # skip to the previous file
+#MBTN_FORWARD  playlist-next       # skip to the next file
+
+# Mouse wheels, touchpad or other input devices that have axes
+# if the input devices supports precise scrolling it will also scale the
+# numeric value accordingly
+#WHEEL_UP      seek 10          # seek 10 seconds forward
+#WHEEL_DOWN    seek -10         # seek 10 seconds backward
+#WHEEL_LEFT    add volume -2    # lower the volume
+#WHEEL_RIGHT   add volume 2     # raise the volume
+
+## Seek units are in seconds, but note that these are limited by keyframes
+#RIGHT seek  5                          # seek 5 seconds forward
+#LEFT  seek -5                          # seek 5 seconds backward
+#UP    seek  60                         # seek 1 minute forward
+#DOWN  seek -60                         # seek 1 minute backward
+# Do smaller, always exact (non-keyframe-limited), seeks with shift.
+# Don't show them on the OSD (no-osd).
+#Shift+RIGHT no-osd seek  1 exact       # seek exactly 1 second forward
+#Shift+LEFT  no-osd seek -1 exact       # seek exactly 1 second backward
+#Shift+UP    no-osd seek  5 exact       # seek exactly 5 seconds forward
+#Shift+DOWN  no-osd seek -5 exact       # seek exactly 5 seconds backward
+#Ctrl+LEFT   no-osd sub-seek -1         # seek to the previous subtitle
+#Ctrl+RIGHT  no-osd sub-seek  1         # seek to the next subtitle
+#Ctrl+Shift+LEFT sub-step -1            # change subtitle timing such that the previous subtitle is displayed
+#Ctrl+Shift+RIGHT sub-step 1            # change subtitle timing such that the next subtitle is displayed
+#Alt+left  add video-pan-x  0.1         # move the video right
+#Alt+right add video-pan-x -0.1         # move the video left
+#Alt+up    add video-pan-y  0.1         # move the video down
+#Alt+down  add video-pan-y -0.1         # move the video up
+#Alt++     add video-zoom   0.1         # zoom in
+#Alt+-     add video-zoom  -0.1         # zoom out
+#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0 # reset zoom and pan settings
+#PGUP add chapter 1                     # seek to the next chapter
+#PGDWN add chapter -1                   # seek to the previous chapter
+#Shift+PGUP seek 600                    # seek 10 minutes forward
+#Shift+PGDWN seek -600                  # seek 10 minutes backward
+#[ multiply speed 1/1.1                 # decrease the playback speed
+#] multiply speed 1.1                   # increase the playback speed
+#{ multiply speed 0.5                   # halve the playback speed
+#} multiply speed 2.0                   # double the playback speed
+#BS set speed 1.0                       # reset the speed to normal
+#Shift+BS revert-seek                   # undo the previous (or marked) seek
+#Shift+Ctrl+BS revert-seek mark         # mark the position for revert-seek
+#q quit                                 # exit
+#Q quit-watch-later                     # exit and remember the playback position
+#q {encode} quit 4                      # exit
+#ESC set fullscreen no                  # leave fullscreen
+#ESC {encode} quit 4                    # exit
+#p cycle pause                          # toggle pause/playback mode
+#. frame-step                           # advance one frame and pause
+#, frame-back-step                      # go back by one frame and pause
+#SPACE cycle pause                      # toggle pause/playback mode
+#> playlist-next                        # skip to the next file
+#ENTER playlist-next                    # skip to the next file
+#< playlist-prev                        # skip to the previous file
+#O no-osd cycle-values osd-level 3 1    # toggle displaying the OSD on user interaction or always
+#o show-progress                        # show playback progress
+#P show-progress                        # show playback progress
+#i script-binding stats/display-stats   # display information and statistics
+#I script-binding stats/display-stats-toggle # toggle displaying information and statistics
+#` script-binding console/enable        # open the console
+#z add sub-delay -0.1                   # shift subtitles 100 ms earlier
+#Z add sub-delay +0.1                   # delay subtitles by 100 ms
+#x add sub-delay +0.1                   # delay subtitles by 100 ms
+#ctrl++ add audio-delay 0.100           # change audio/video sync by delaying the audio
+#ctrl+- add audio-delay -0.100          # change audio/video sync by shifting the audio earlier
+#Shift+g add sub-scale +0.1             # increase the subtitle font size
+#Shift+f add sub-scale -0.1             # decrease the subtitle font size
+#9 add volume -2                        # lower the volume
+#/ add volume -2                        # lower the volume
+#0 add volume 2                         # raise the volume
+#* add volume 2                         # raise the volume
+#m cycle mute                           # toggle mute
+#1 add contrast -1                      # decrease the contrast
+#2 add contrast 1                       # increase the contrast
+#3 add brightness -1                    # decrease the brightness
+#4 add brightness 1                     # increase the brightness
+#5 add gamma -1                         # decrease the gamma
+#6 add gamma 1                          # increase the gamma
+#7 add saturation -1                    # decrease the saturation
+#8 add saturation 1                     # increase the saturation
+#Alt+0 set current-window-scale 0.5     # halve the window size
+#Alt+1 set current-window-scale 1.0     # reset the window size
+#Alt+2 set current-window-scale 2.0     # double the window size
+#d cycle deinterlace                    # toggle the deinterlacing filter
+#r add sub-pos -1                       # move subtitles up
+#R add sub-pos +1                       # move subtitles down
+#t add sub-pos +1                       # move subtitles down
+#v cycle sub-visibility                 # hide or show the subtitles
+#Alt+v cycle secondary-sub-visibility   # hide or show the secondary subtitles
+#V cycle sub-ass-vsfilter-aspect-compat # toggle stretching SSA/ASS subtitles with anamorphic videos to match the historical renderer
+#u cycle-values sub-ass-override "force" "no" # toggle overriding SSA/ASS subtitle styles with the normal styles
+#j cycle sub                            # switch subtitle track
+#J cycle sub down                       # switch subtitle track backwards
+#SHARP cycle audio                      # switch audio track
+#_ cycle video                          # switch video track
+#T cycle ontop                          # toggle placing the video on top of other windows
+#f cycle fullscreen                     # toggle fullscreen
+#s screenshot                           # take a screenshot of the video in its original resolution with subtitles
+#S screenshot video                     # take a screenshot of the video in its original resolution without subtitles
+#Ctrl+s screenshot window               # take a screenshot of the window with OSD and subtitles
+#Alt+s screenshot each-frame            # automatically screenshot every frame; issue this command again to stop taking screenshots
+#w add panscan -0.1                     # decrease panscan
+#W add panscan +0.1                     # shrink black bars by cropping the video
+#e add panscan +0.1                     # shrink black bars by cropping the video
+#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1" # cycle the video aspect ratio ("-1" is the container aspect)
+#POWER quit                             # exit
+#PLAY cycle pause                       # toggle pause/playback mode
+#PAUSE cycle pause                      # toggle pause/playback mode
+#PLAYPAUSE cycle pause                  # toggle pause/playback mode
+#PLAYONLY set pause no                  # unpause
+#PAUSEONLY set pause yes                # pause
+#STOP quit                              # exit
+#FORWARD seek 60                        # seek 1 minute forward
+#REWIND seek -60                        # seek 1 minute backward
+#NEXT playlist-next                     # skip to the next file
+#PREV playlist-prev                     # skip to the previous file
+#VOLUME_UP add volume 2                 # raise the volume
+#VOLUME_DOWN add volume -2              # lower the volume
+#MUTE cycle mute                        # toggle mute
+#CLOSE_WIN quit                         # exit
+#CLOSE_WIN {encode} quit 4              # exit
+#ctrl+w quit                            # exit
+#E cycle edition                        # switch edition
+#l ab-loop                              # set/clear A-B loop points
+#L cycle-values loop-file "inf" "no"    # toggle infinite looping
+#ctrl+c quit 4                          # exit
+#DEL script-binding osc/visibility      # cycle OSC visibility between never, auto (mouse-move) and always
+#ctrl+h cycle-values hwdec "auto" "no"  # toggle hardware decoding
+#F8 show-text ${playlist}               # show the playlist
+#F9 show-text ${track-list}             # show the list of video, audio and sub tracks
+
+#
+# Legacy bindings (may or may not be removed in the future)
+#
+#! add chapter -1                       # seek to the previous chapter
+#@ add chapter 1                        # seek to the next chapter
+
+#
+# Not assigned by default
+# (not an exhaustive list of unbound commands)
+#
+
+# ? cycle sub-forced-only               # toggle DVD forced subs
+# ? stop                                # stop playback (quit or enter idle mode)
+