Use extra/swappy rather than aur/swappy-git

home/.config/git/config

@@ -102,3 +102,4 @@
     gpgsign = true
 [init]
     defaultBranch = main
+    templatedir = ~/.config/git/templates

home/.config/git/templates/hooks/commit-msg

@@ -0,0 +1,156 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+# A hook script to check the commit log message.
+# Called by "git commit" with one argument, the name of the file
+# that has the commit message.  The hook should exit with non-zero
+# status after issuing an appropriate message if it wants to stop the
+# commit.  The hook is allowed to edit the commit message file.
+
+# This script focuses on enforcing semantic commit message specification.
+#
+# It primarily focuses on the commit title, however, it also enforces some
+# the mandatory newline between the title and the body.
+
+LIGHT_GRAY="\033[0;37m"
+YELLOW="\033[33m"
+CYAN="\033[36m"
+RED="\033[31m"
+UNDO_COLOR="\033[0m"
+
+check_dependencies() {
+  if ! [ -x "$(command -v jq)" ]; then
+    echo "\`commit-msg\` hook failed. Please install jq."
+    exit 1
+  fi
+}
+
+load_config() {
+  config_file="$PWD/.commit-msg-config.json"
+
+  if [ ! -f "$config_file" ]; then
+    exit 0
+  fi
+
+  enabled=$(jq -r .enabled "$config_file")
+
+  if [ "$enabled" != "true" ]; then
+    exit 0
+  fi
+
+  title_semver_enabled=$(jq -r .semver_structure "$config_file")
+  mapfile -t special_types < <(jq -r '.special_types[]' "$config_file")
+  mapfile -t types < <(jq -r '.types[]' "$config_file")
+  mapfile -t scopes < <(jq -r '.scopes[]' "$config_file")
+  title_min_length=$(jq -r '.length.min' "$config_file")
+  title_max_length=$(jq -r '.length.max' "$config_file")
+}
+
+# Build a dynamic regex for the commit message
+build_title_regex() {
+  regexp="^("
+
+  # Special types
+  if [ ${#special_types[@]} -eq 0 ]; then
+    for s_type in "${special_types[@]}"; do
+      regexp="${regexp}$s_type|"
+    done
+    regexp="${regexp%|})"
+
+    regexp="${regexp}(: .+)?"
+
+    regexp="${regexp}$|^("
+  fi
+
+  # Types
+  if [ ${#types[@]} -eq 0 ]; then
+    regexp="${regexp}.+"
+  else
+    for type in "${types[@]}"; do
+      regexp="${regexp}$type|"
+    done
+    regexp="${regexp%|})"
+  fi
+
+  # Scope
+  regexp="${regexp}(\("
+  if [ ${#scopes[@]} -eq 0 ]; then
+    regexp="${regexp}.+"
+  else
+    for scope in "${scopes[@]}"; do
+      regexp="${regexp}$scope|"
+    done
+    regexp="${regexp%|}"
+  fi
+  regexp="${regexp}\))?"
+
+  # Breaking change indicator
+  regexp="${regexp}(!)?"
+
+  regexp="${regexp}: (.+)$"
+}
+
+error_header() {
+  echo -e "${RED}[Invalid Commit Message]${UNDO_COLOR}"
+  echo -e "------------------------"
+}
+
+# ---------------------------------------------
+
+INPUT_FILE="$1"
+
+check_dependencies
+load_config
+
+# Get the actual commit message, excluding comments
+commit_message=$(sed '/^#/d' <"$INPUT_FILE")
+
+# Don't do any checking on empty commit messages.
+# Git will abort empty commits by default anyways.
+if [ -z "$commit_message" ]; then
+  exit 0
+fi
+
+commit_title=$(echo "$commit_message" | head -n1 "$INPUT_FILE")
+
+# Check the semver commit title structure first
+if [ "$title_semver_enabled" == "true" ]; then
+  build_title_regex
+
+  if [[ ! $commit_title =~ $regexp ]]; then
+    error_header
+    echo -e "${LIGHT_GRAY}Valid types: ${UNDO_COLOR}${CYAN}${types[*]}${UNDO_COLOR}"
+    echo -e "${LIGHT_GRAY}Valid special types: ${UNDO_COLOR}${CYAN}${special_types[*]}${UNDO_COLOR}"
+    if [ ${#scopes[@]} -eq 0 ]; then
+      echo -e "${LIGHT_GRAY}Valid scopes: any${UNDO_COLOR}"
+    else
+      echo -e "${LIGHT_GRAY}Valid scopes: ${UNDO_COLOR}${CYAN}${scopes[*]}${UNDO_COLOR}"
+    fi
+
+    #echo -e "${LIGHT_GRAY}Expected regex: ${UNDO_COLOR}${CYAN}${regexp}${UNDO_COLOR}"
+
+    echo -e "Actual commit title: ${YELLOW}${commit_title}${UNDO_COLOR}"
+    exit 1
+  fi
+fi
+
+# Then check the length of the commit title
+commit_title_len=${#commit_title}
+if { [ "$title_min_length" != "null" ] && [ "$commit_title_len" -lt "$title_min_length" ]; } ||
+  { [ "$title_max_length" != "null" ] && [ "$commit_title_len" -gt "$title_max_length" ]; }; then
+  error_header
+  echo -e "${LIGHT_GRAY}Expected title (first line) length: Min=${CYAN}$title_min_length${UNDO_COLOR} Max=${CYAN}$title_max_length${UNDO_COLOR}"
+  echo -e "Actual length: ${YELLOW}${commit_title_len}${UNDO_COLOR}"
+  exit 1
+fi
+
+# Check for a newline between the title and the body
+if [ "$(echo "$commit_message" | wc -l)" -gt 1 ]; then
+  second_line=$(echo "$commit_message" | sed -n '2p')
+  third_line=$(echo "$commit_message" | sed -n '3p')
+  if [ "$second_line" != "" ] || [ "$third_line" == "" ]; then
+    error_header
+    echo -e "There must be exactly one blank line between the commit title and the body."
+    exit 1
+  fi
+fi

home/.local/bin/scripts/gui/hyprland/hyprland-screenshot

@@ -1,19 +1,18 @@
-#!/bin/sh
+#!/bin/bash
 
 # Inspired by grimblast (https://github.com/hyprwm/contrib/blob/main/grimblast/grimblast)
 
 # Helper functions
 
 die() {
-	MSG="${1}"
-	ERR_CODE="${2:-1}"
-	URGENCY="${3:-critical}"
+  MSG="${1}"
+  ERR_CODE="${2:-1}"
+  URGENCY="${3:-critical}"
 
-	>&2 echo "$MSG"
-	if [ "$NOTIFY" = "yes" ]; then
-		notify-send -a screenshot -u "$URGENCY" "Error ($ERR_CODE)" "$MSG"
-	fi
-	exit "$ERR_CODE"
+  if [ "$NOTIFY" = "yes" ]; then
+    notify-send -a screenshot -u "$URGENCY" "Error ($ERR_CODE)" "$MSG"
+  fi
+  exit "$ERR_CODE"
 }
 
 # Argument parsing
@@ -27,9 +26,9 @@ EDIT=no
 DELAY=0
 
 while [ "${1-}" ]; do
-	case "$1" in
-	-h | --help)
-		>&2 cat <<EOF
+  case "$1" in
+  -h | --help)
+    >&2 cat <<EOF
 screenshot taking utility script, allowing for easy all-in-one solution for
 controlling how a screenshot should be taken.
 
@@ -54,163 +53,163 @@ Variables:
         - all: Everything (all visible monitors/outputs)
         - area: Manually select a region
 EOF
-		exit 0
-		;;
-	--notify)
-		NOTIFY=yes
-		shift
-		;;
-	--cursor)
-		CURSOR=yes
-		shift
-		;;
-	--edit)
-		EDIT=yes
-		shift
-		;;
-	--target)
-		if [ -z "$TARGET" ]; then
-			case "$2" in
-			activewin | window | activemon | monitor | all | area)
-				TARGET="$2"
-				shift 2
-				;;
-			*)
-				die "Invalid target (see TARGET variable in --help)"
-				;;
-			esac
-		else
-			die "Only one target can be passed."
-		fi
-		;;
-	--delay)
-		case "$2" in
-		'' | *[!0-9]*)
-			die "Argument after --delay must be an amount of MILISECONDS"
-			;;
-		*)
-			DELAY="$2"
-			shift 2
-			;;
-		esac
-		;;
+    exit 0
+    ;;
+  --notify)
+    NOTIFY=yes
+    shift
+    ;;
+  --cursor)
+    CURSOR=yes
+    shift
+    ;;
+  --edit)
+    EDIT=yes
+    shift
+    ;;
+  --target)
+    if [ -z "$TARGET" ]; then
+      case "$2" in
+      activewin | window | activemon | monitor | all | area)
+        TARGET="$2"
+        shift 2
+        ;;
+      *)
+        die "Invalid target (see TARGET variable in --help)"
+        ;;
+      esac
+    else
+      die "Only one target can be passed."
+    fi
+    ;;
+  --delay)
+    case "$2" in
+    '' | *[!0-9]*)
+      die "Argument after --delay must be an amount of MILISECONDS"
+      ;;
+    *)
+      DELAY="$2"
+      shift 2
+      ;;
+    esac
+    ;;
 
-	--copy)
-		if [ -z "$SAVE_METHOD" ]; then
-			SAVE_METHOD="copy"
-			shift
-		else
-			die "Only one method can be passed."
-		fi
-		;;
-	--save)
-		if [ -z "$SAVE_METHOD" ]; then
-			SAVE_METHOD="save"
-			SAVE_FILE="$2"
-			shift 2
-		else
-			die "Only one method can be passed."
-		fi
-		;;
-	--copysave)
-		if [ -z "$SAVE_METHOD" ]; then
-			SAVE_METHOD="copysave"
-			SAVE_FILE="$2"
-			shift 2
-		else
-			die "Only one method can be passed."
-		fi
-		;;
-	*)
-		die "Unrecognized argument: $1"
-		;;
-	esac
+  --copy)
+    if [ -z "$SAVE_METHOD" ]; then
+      SAVE_METHOD="copy"
+      shift
+    else
+      die "Only one method can be passed."
+    fi
+    ;;
+  --save)
+    if [ -z "$SAVE_METHOD" ]; then
+      SAVE_METHOD="save"
+      SAVE_FILE="$2"
+      shift 2
+    else
+      die "Only one method can be passed."
+    fi
+    ;;
+  --copysave)
+    if [ -z "$SAVE_METHOD" ]; then
+      SAVE_METHOD="copysave"
+      SAVE_FILE="$2"
+      shift 2
+    else
+      die "Only one method can be passed."
+    fi
+    ;;
+  *)
+    die "Unrecognized argument: $1"
+    ;;
+  esac
 done
 
 # Screenshot functions
 
 takeScreenshot() {
-	FILE="$1"
-	GEOM="$2"
+  FILE="$1"
+  GEOM="$2"
 
-	ARGS=()
-	[ "$CURSOR" = "yes" ] && ARGS+=("-c")
-	[ -n "$GEOM" ] && ARGS+=("-g" "$GEOM")
-	ARGS+=("$FILE")
+  ARGS=()
+  [ "$CURSOR" = "yes" ] && ARGS+=("-c")
+  [ -n "$GEOM" ] && ARGS+=("-g" "$GEOM")
+  ARGS+=("$FILE")
 
-	sleep "$DELAY"e-3
-	grim "${ARGS[@]}" || die "Unable to invoke grim"
+  sleep "$DELAY"e-3
+  grim "${ARGS[@]}" || die "Unable to invoke grim"
 }
 
 takeEditedScreenshot() {
-	FILE="$1"
-	GEOM="$2"
+  FILE="$1"
+  GEOM="$2"
 
-	if [ "$EDIT" = "yes" ]; then
-		takeScreenshot - "$GEOM" | swappy -f - -o "$FILE" || die "Unable to invoke swappy"
-	else
-		takeScreenshot "$FILE" "$GEOM"
-	fi
+  if [ "$EDIT" = "yes" ]; then
+    takeScreenshot - "$GEOM" | swappy -f - -o "$FILE" || die "Unable to invoke swappy"
+  else
+    takeScreenshot "$FILE" "$GEOM"
+  fi
 }
 
 # Obtain the geometry for screenshot to be taken at
 
 if [ "$TARGET" = "area" ]; then
-	GEOM="$(slurp -d)"
-	if [ -z "$GEOM" ]; then
-		die "No area selected" 2 normal
-	fi
-	WHAT="Area"
+  GEOM="$(slurp -d)"
+  if [ -z "$GEOM" ]; then
+    die "No area selected" 2 normal
+  fi
+  WHAT="Area"
 elif [ "$TARGET" = "all" ]; then
-	GEOM=""
-	WHAT="Screen"
+  GEOM=""
+  WHAT="Screen"
 elif [ "$TARGET" = "activewin" ]; then
-	FOCUSED="$(hyprctl activewindow -j)"
-	GEOM="$(echo "$FOCUSED" | jq -r '"\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"')"
-	APP_ID="$(echo "$FOCUSED" | jq -r '.class')"
-	WHAT="$APP_ID window"
+  FOCUSED="$(hyprctl activewindow -j)"
+  GEOM="$(echo "$FOCUSED" | jq -r '"\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"')"
+  APP_ID="$(echo "$FOCUSED" | jq -r '.class')"
+  WHAT="$APP_ID window"
 elif [ "$TARGET" = "window" ]; then
-	WORKSPACES="$(hyprctl monitors -j | jq -r 'map(.activeWorkspace.id)')"
-	WINDOWS="$(hyprctl clients -j | jq -r --argjson workspaces "$WORKSPACES" 'map(select([.workspace.id] | inside($workspaces)))')"
-	GEOM=$(echo "$WINDOWS" | jq -r '.[] | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"' | slurp -r)
-	if [ -z "$GEOM" ]; then
-		die "No window selected" 2 normal
-	fi
-	WHAT="Window"
+  WORKSPACES="$(hyprctl monitors -j | jq -r 'map(.activeWorkspace.id)')"
+  WINDOWS="$(hyprctl clients -j | jq -r --argjson workspaces "$WORKSPACES" 'map(select([.workspace.id] | inside($workspaces)))')"
+  GEOM=$(echo "$WINDOWS" | jq -r '.[] | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"' | slurp -r)
+  if [ -z "$GEOM" ]; then
+    die "No window selected" 2 normal
+  fi
+  WHAT="Window"
 elif [ "$TARGET" = "activemon" ]; then
-	ACTIVEMON="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')"
-	GEOM="$(echo "$ACTIVEMON" | jq -r '"\(.x),\(.y) \(.width)x\(.height)"')"
-	WHAT="$(echo "$ACTIVEMON" | jq -r '.name')"
+  ACTIVEMON="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')"
+  GEOM="$(echo "$ACTIVEMON" | jq -r '"\(.x),\(.y) \(.width)x\(.height)"')"
+  WHAT="$(echo "$ACTIVEMON" | jq -r '.name')"
 elif [ "$TARGET" = "monitor" ]; then
-	GEOM="$(slurp -o)"
-	if [ -z "$GEOM" ]; then
-		die "No monitor selected" 2 normal
-	fi
-	WHAT="Monitor"
+  GEOM="$(slurp -o)"
+  if [ -z "$GEOM" ]; then
+    die "No monitor selected" 2 normal
+  fi
+  WHAT="Monitor"
 else
-	if [ -z "$TARGET" ]; then
-		die "No target specified!"
-	else
-		die "Unknown target: $SAVE_METHOD"
-	fi
+  if [ -z "$TARGET" ]; then
+    die "No target specified!"
+  else
+    die "Unknown target: $SAVE_METHOD"
+  fi
 fi
 
 # Invoke grim and capture the screenshot
 
 if [ "$SAVE_METHOD" = "save" ]; then
-	takeEditedScreenshot "$SAVE_FILE" "$GEOM"
-	[ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot saved" -i "$(realpath "$SAVE_FILE")"
+  takeEditedScreenshot "$SAVE_FILE" "$GEOM"
+  [ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot saved" -i "$(realpath "$SAVE_FILE")"
 elif [ "$SAVE_METHOD" = "copy" ]; then
-	TEMP_FILE="$(mktemp --suffix=.png)"
-	takeEditedScreenshot "-" "$GEOM" | tee "$TEMP_FILE" | wl-copy --type image/png || die "Clipboard error"
-	[ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot copied" -i "$(realpath "$TEMP_FILE")" && rm "$TEMP_FILE"
+  TEMP_FILE="$(mktemp --suffix=.png)"
+  takeEditedScreenshot "-" "$GEOM" | tee "$TEMP_FILE" | wl-copy --type image/png || die "Clipboard error"
+  [ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot copied" -i "$(realpath "$TEMP_FILE")" && rm "$TEMP_FILE"
 elif [ "$SAVE_METHOD" = "copysave" ]; then
-	takeEditedScreenshot "-" "$GEOM" | tee "$SAVE_FILE" | wl-copy --type image/png || die "Clipboard error"
-	[ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot copied and saved" -i "$(realpath "$SAVE_FILE")"
+  takeEditedScreenshot "-" "$GEOM" | tee "$SAVE_FILE" | wl-copy --type image/png || die "Clipboard error"
+  [ "$NOTIFY" = "yes" ] && notify-send -a screenshot "Success" "$WHAT screenshot copied and saved" -i "$(realpath "$SAVE_FILE")"
 else
-	if [ -z "$SAVE_METHOD" ]; then
-		die "No save method specified!"
-	else
-		die "Unknown save method: $SAVE_METHOD"
-	fi
+  if [ -z "$SAVE_METHOD" ]; then
+    die "No save method specified!"
+  else
+    die "Unknown save method: $SAVE_METHOD"
+  fi
 fi

install_gui.sh

@@ -107,7 +107,7 @@ paru -S --noconfirm --needed \
 
 # Wayland Utilities
 paru -S --noconfirm --needed \
-  grim slurp wofi swappy-git wf-recorder wlogout clipman hyprpicker hyprpaper
+  grim slurp wofi swappy wf-recorder wlogout clipman hyprpicker hyprpaper
 
 # Applications
 paru -S --noconfirm --needed \