From 903123081b1c74f4e097e1f9d30dc02c73b9bebe Mon Sep 17 00:00:00 2001 From: ItsDrike Date: Sat, 27 Jan 2024 19:42:08 +0100 Subject: [PATCH] Add btrfs post --- content/posts/btrfs.md | 204 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 content/posts/btrfs.md diff --git a/content/posts/btrfs.md b/content/posts/btrfs.md new file mode 100644 index 0000000..3e7ff65 --- /dev/null +++ b/content/posts/btrfs.md @@ -0,0 +1,204 @@ +--- +title: Jumping on the BTRFS hype wagon +date: 2024-01-27 +tags: [linux] +sources: + - + - + - + - +--- + +After a long time constantly hearing about BTRFS filesystem, I decided to make the jump, leaving EXT4 behind. And I +have to say, I couldn't be happier. + +For those unaware, BTRFS is a B-tree based filesystem, which you can use as an alternative to EXT4, with some really +cool new features, which I'll mention in the post here. In many ways, it is similar to ZFS, but it is meant for +personal use, rather than being enterprise focused, and unlike with ZFS, there aren't any licensing controversies +accompanying it. + +## Subvolumes + +First thing to mention (and for me probably the most important thing) about BTRFS is it's feature allowing you to +create subvolumes. + +Volumes are sort of like partitions, however instead of being done on the device level, specified in a partition table +with concrete start and end sectors, making it occupy a very specific, well, "partiton" of the drive, subvolumes are a +feature of the filesystem, allowing you to split it up into individual portions, that all live on a single BTRFS +partition. + +### Dynamic space + +This is really cool, because these subvolumes can act almost like plain folders within the BTRFS root, and that means +they don't have to have a size specified. They will all simply share the single partition, and all of the subvolumes +will have the same amount of free space as there is available on the entire partition. + +You can therefore really easily create separate subvolumes for your home (/home) and root (/), mount them individually, +and pretty much treat them like regular partitions, but without having to make the decision about how to divide your +disk space between them during installation. + +For me, this is a HUGE benefit, because I'm a major proponent for the split architecture, where your home and root (or +at least root and some kind of persistent data partition) are separate. This is because it allows you to only wipe out +one of them when reinstalling, without the need to copy-over potentially hundreds of gigabytes of data from a backup. + +In EXT4, it was always annoying to have to decide on how much space to allocate to each partition, because I knew that +I could use the extra space for my data, but if I ever ran out of space in my root partition, it would pretty much mean +I'm gonna have to reinstall, and re-partition, as there's really no good way to expand a partition without corrupting +the one right below. + +This setup finally changed that, and I can keep my data separate and persistent across installations, without having to +compromise on space for my root partition. + +{{< notice tip >}} +While subvolumes are dynamic by default, it is actually possible to set a cap for the max size that subvolume can reach +if you need to do so. This can be useful to prevent something growing unpredictably in size. This limit can later be +easily increased if needed, making it far superior to regular partitions, which would need to be moved/recreated. +{{< /notice >}} + +### Automatic compression + +Another great feature BTRFS subvolumes give you is the ability to specify different compression levels on each of your +subvolumes. BTRFS allows you to pick from various compression algorithms, but the most common one which you'll probably +want to use too is `zstd`. You can then a compression level 1-10, which will control how aggressive the compression +will be. + +This is really nice, because you can set up a separate subvolume for your cache or static data files, to be compressed +at high levels, which will cost some CPU time and slow down the read/write speeds to the data stored there, but at the +benefit of greatly reducing the disk size, while keeping your root subvolume, which will be written to a lot at a low +compression level (or even disable the compression there), and will therefore have a much quicker disk speeds. + +Because cache files usually aren't accessed that often, and contain a lot of data (like for example the pacman package +cache, which will contain the older versions of packages you installed, to allow easily reverting), I find it really +worth it to be able to create a highly compressed subvolume mounted on `/var/cache`. Additionally, I also have a pretty +high compression level on my data subvolume, though since it does contain videos, I don't necessarily use the highest +compression level there, to allow me to seamlessly watch them without disk buffering. + +## Snapshots + +Another really cool feature that BTRFS has is the ability to take instant snapshots of a volume, for great backups. +This is possible because the snapshot create will essentially just be a link, pointing to the current state of the +subvolume it targets, so the only thing that happens on the file-system side is basically a creation of that link, +there's no copying done anywhere! + +### Technical explanation + +You can basically think of these as hard-links, pointing to the subvolume itself. Since BTRFS is a **copy-on-write** +filesystem, rather than modifying the blocks affected (a single file can take up a lot of physical blocks), which is +what EXT4 would do, it instead creates new blocks, where the data for that file is written to, and updating the file +metadata, telling it that it should now use these new blocks. + +This is really nice, because when writing to the disk, you're gonna be writing a whole block at a time anyway, so +instead of overwriting the existing old one, BTRFS will use a new one, leaving the old ones behind. So if a file is +composed of a lot of blocks, only the blocks that actually changed will be copied, and BTRFS will store the information +that a part of that file is now in some other physical blocks. + +(Not updating the original location also eliminates the risk of a partial update or data corruption during a power +failure.) + +That means you can create hard-links that point to the original blocks, rather than the original files, and since BTRFS +won't change those original blocks, but instead will copy the changes to new blocks, these hard-links remain unaffected +by any new changes. + +In an EXT4 filesystem, is you have a hard-link, it will always be linked to the inode, representing the hard-linked +file, and whenever the file is updated, it's the blocks specified by that inode that get updated, meaning you'll end up +with it being modified both on the original (system) file, and in the hard-link pointing to it. + +This kind of hard-link behavior is also possible on BTRFS systems, however you can also hard-link in a way that doesn't +update, and instead just holds the original blocks, so as the real system is changing, it's pretty much only the +deltas/diffs that get stored, making the backup only take as much space, as the newly made changes since it was taken. + +Once a snapshot is deleted, the old blocks that aren't used in the primary volume anymore will be allowed to get +overwritten, hence gaining that space back. + +### Backups at no cost + +Because of the way BTRFS handles snapshots, it therefore allows us to make backups which are essentially just the size +of a single link, and are instant. They only get expensive as the original subvolume gets updated. This means it's +really beneficial to set up an auto-snapshot routine with auto-rotation, and taking a lot of snapshots. For example, +this is mine: + +- 8 hourly snapshots (taken using cron, once we reach 9th snapshot, the oldest one is deleted) +- 4 quaterly snapshots (taken using cron, every 15 minutes, except on the full hour, as that's covered by hourly) +- 8 daily snapshots (taken by anacron, every day) +- 4 weekly snapshots (taken by anacron) +- 3 monthly snapshots (taken by anacron) + +Notice just how many hourly and quaterly snapshots I'm able to take, literally I make a snapshot of my system every 15 +minutes, and i don't even notice!! It comes at no performance cost, not high CPU usage as the files are being copied +over, all perfectly seamless. + +To achieve this, I made a bash script that can handle this auto-rotation and snapshot taking, which I'm just calling +from cron/anacron. If you're interested, you can find it in my +[dotfiles](https://github.com/ItsDrike/dotfiles/blob/main/root/usr/local/bin/btrfs-backup). + +The only backups that I do see some actual space cost from are the monthly ones, which do get out of sync eventually, +and so a lot of files are indeed different there. + +### Stupid simple restore + +Snapshots of subvolumes themselves are just another subvolumes, and if you need to restore a snapshot, all you need to +do is change the path where your main subvolume is pointing to, switching it to that backup, and done, you've restored +from a snapshot. + +This is super cool, because you can for example take some snapshots during your installation, and if you want to +reinstall, you can just revert back to those. + +Another really useful thing this allows is to take a snapshot before installing some big app that you really only need +to use once, and then revert back, making sure that no residual files from that app will be left behind. Having +quaterly snapshots is especially useful here, since you may install something you think you'll want to be using for a +long time, only to realize it's actually not all that good. + +{{< notice warning >}} + +With all this great talk about snapshots, you may think that once set up, you'll never need to do those tedious full +system backups ever again. Well, that's not true. While snapshots really are amazing, remember that they still all live +on a single partition in a single drive. If this drive were to fail, all of your data on it, including the snapshots +might get corrupted. + +For that reason, it is very important that you don't just blindly replace your full backup strategies here. + +{{< /notice >}} + +## Multiple system versions + +Another amazing thing you can set up is creating automated boot records for every snapshot, allowing you to boot into +an older version of your system completely seamlessly. + +All you need to do to make this work is changing the kernel arguments and defining a different subvolume as your +root, specifically, the subvolume containing the snapshot you want to boot into. + +Not only is this really useful for getting into an older system version by booting into snapshots, you can actually use +non-snapshot subvolumes too. That means you could easily even keep multiple distributions on a single BTRFS partition. +(With dynamic space, shared for each system.) + +## Built-in RAID + +BTRFS also has a built-in support for RAID-0, RAID-1 and RAID-10 levels. + +This type of RAID will ensure that for every block, there are "x" amount of copies. For RAID-1 for example, BTRFS +just stores two copies of everything on two different devices. + +Unlike a simple `mdadm` software raid, BTRFS supports self-healing redundant arrays and online balancing, as BTRFS +maintains CRC's for all metadata and data so everything is checksummed to preserve the integrity of data against +corruption. With RAID-1 or RAID-10 configuration, if the checksum fails on the first read, data is pulled off from +another copy. + +## Great SSD performance + +Another benefit of BTRFS is it's automatic detection of solid state drives (SSDs). If an SSD is detected, BTRFS will +turn off all optimization for rotational media (i.e. optimizations to reduce seeking, by storing related data close +together on spinning drives, which isn't important with SSDs). Alongside that, there's also TRIM support, which tells +the SSD which blocks are no longer needed and are available to be written over. + +These will improve reading/writing speed, since the useless CPU intensive operations for spinning drives are disabled, +and it can also extend your SSD's lifespan, due to that TRIM support. + +## Efficient storage for small files + +All Linux filesystems address storage in blocks. These blocks have some pre-defined size, like say 4KB. That means +storing a file that's smaller than this size will result in the block not being completely utilized. Using a smaller +block size isn't a good option either, because it means having to store more metadata (there's more blocks to keep +track of). + +On BTRFS, for very small files, the data will actually be stored in the metadata, without taking up any of the data +blocks!