nixdots/docs/99_MY_FLAKE.md

Integrating my flake

This file will walk you through setting up my flake. You can follow this guide directly from INSTALLATION, or after any of the other optional steps. This will however assume the minimal set up that you would have after just finishing the installation, so if you're following from a more advanced setup, some things here may be redundant.

This assumes that you're setting up a new machine, and adding it to my flake (as opposed to attempting to use an existing machine that's already declared - for example after a reinstall, although after reading through this guide, it should be fairly easy to understand how to set up an existing machine too).

Clonning

Now, let's move your config over to my flake, creating a new host machine there. Unless you're me, you will want to fork my nix flake repository so that you can actually push to it before continuing.

First, you will need to git clone the flake. However, in the base system, there is no git, so let's first add this to our configuration.nix:

programs.git.enable = true;

Let's also enable flake support, so we can use nix flake command:

nix.settings.experimental-features = [ "nix-command" "flakes" ];

and run nixos-rebuild switch

Once done, log in as your unprivileged user, and clone my flake: git clone https://github.com/ItsDrike/nixdots ~/dots.

Setting up git for new commits

In order to make any extra commits, you will need to set up a git user now, and log in to github. For a quick and dirty way to achieve this, I'd recommend just setting a local git config for the ~/dots repository. This is enough for now, as my flake will introduce proper git setup once cloned anyway:

cd ~/dots
git config --local user.name ItsDrike
git config --local user.email itsdrike@protonmail.com

If you also need commit signing, you can set it up by adding gnupg package, importing your keys and setting a signing key here too, however, I'd recommend against that. Instead, you can just rebase and sign the commits afterwards, once you have my flake set up, as it already contains support for this. Similarly, setting up authorization to allow you to push to github with your account is also something you can do after my flake is set up.

For now, let's just work on a temporary branch:

git checkout -b temp

Moving config over

At this point, we're ready to move our configuration over to my flake, by declaring a new host machine. To do this, first, let's create a directory in ~/dots/hosts, with the same name as you're machines hostname (you can call it something else too if you like, but this is the naming convention I follow) (for some reason, the naming scheme for my machines follow the names of famous sword from Lord of the Rings).

mkdir ~/dots/hosts/anduril

Now declare this host in ~/dots/hosts/default.nix:

  anduril = lib.nixosSystem {
    system = "x86_64-linux";
    modules = [
      ./anduril
      inputs.home-manager.nixosModules.home-manager
    ] ++ shared;
  };

And copy the current files in /etc/nixos/ to ~/dots/hosts/anduril, renaming configuration.nix to default.nix

cp /etc/nixos/* ~/dots/hosts/anduril
mv ~/dots/hosts/anduril/{configuration.nix,default.nix}

Adjusting some things

Once moved, assuming you get rid of most of the settings in default.nix, as my flake will handle setting almost everything up for you. Instead, you can use my custom options to declare almost everything. The resulting file should then look something like this:

{ lib, pkgs, ... }:
{
  imports = [
    ./hardware-configuration.nix
  ];

  boot.supportedFilesystems = [ "btrfs" ];
  hardware.enableAllFirmware = true;

  # My flake disables password-based SSH authentication.
  # either set up a key based auth, or uncomment this
  #services.openssh.settings.PasswordAuthentication = lib.mmkForce true;

  nix.settings = {
    max-jobs = 6;
    cores = 6;
  };

  # NixOS release from which this machine was first installed.
  # (for stateful data, like file locations and db versions)
  # Leave this alone!
  system.stateVersion = lib.mkForce "23.11";

  myOptions = {
    system = {
      hostname = "anduril";
      username = "itsdrike";

      #impermanence = {
      #  root = {
      #    enable = true;
      #    # Some people use /nix/persist/system for this, leaving persistent files in /nix subvolume
      #    # I much prefer using a standalone subvolume for this though.
      #    persistentMountPoint = "/persist";
      #  };
      #
      #  # Configure automatic root subvolume wiping on boot from initrd
      #  autoWipeBtrfs = {
      #    enable = true;
      #    devices."/dev/disk/by-label/NIXROOT".subvolumes = [ "root" ];
      #  };
      #};
    };
    device = {
      virtual-machine = false;
      cpu.type = "intel";
    };
    home-manager = {
      enabled = true;
      stateVersion = "23.11";
      git = {
        userName = "ItsDrike";
        userEmail = "itsdrike@protonmail.com";
        signing = {
          enabled = true;
          key = "FA2745890B7048C0";
        };
      };
    };
  };
}

Commit and switch

Once you've declared everything, make a commit and run nix flake check to make sure you everything checks out, and you didn't make any typos or other issues.

git add hosts
git commit -m "Add anduril host"
nix flake check .

Warning

If you're logged in through SSH, you will need to set up a key based authentication before switching, since password auth for SSH is disabled in my flake.

Finally, you should now be ready to switch:

sudo nixos-rebuild switch --flake .

If everything went well, you should now be left with a system configured to my specification.

Last steps

Now that you've managed set up my flake, there are a few last steps to take.

First, you will probably now still be in a bash shell, I however use zsh, so you will want to re-login.

Neovim

Once in zsh, another important step to set up neovim. Since I use a custom configuration, which relies on a lot of plugins and other utilities, you will want to run neovim in headless mode for the first time, and leave it to install all of these automatically:

nvim --headless +q

Once this completes, run neovim. Note that you will still see Mason installing a bunch of tools now, which will cause a lot of notifications. Don't be alarmed by that, it is normal. Once the notifications stop, the installation process will be truly complete. You can then close this instance neovim.

XDG base dirs

My flake exports various environment variables and does a bunch of other things to force applications into following XDG base directory specification and not cluttering $HOME.

However, since we used a bunch of applications already, before moving to my flake. There will be a bunch of files or directories that already got made. We will need to move these to their appropriate XDG locations, or even delete them entirely, if we're not using these applications anymore, or if these applications are capable of automatically recreating these directories trivially:

rm "$HOME/.nix-defexpr"
rm "$HOME/.bash_history"

GPG keys and commit signing

Another important thing is to finish up setting your git commit signing. As you've probably noticed from the myOptions config, I have already defined my signing key there, however you will need to import this gpg key manually.

Export your public and private keys with GPG and make them available on this machine. To do so, you can run these commands from another machine:

gpg --output ./my-key.pub.gpg --armor --export [key-id]
gpg --output ./my-key.priv.gpg --armor --export-secret-keys [key-id]
# Now get these files to the new machine
# you can use sftp, or just a flash drive or whatever other method you prefer

Once the keys are available, run these commands from the new machine:

gpg --import ./my-key.pub.gpg
gpg --import ./my-key.priv.gpg

You might also want to change the trust level for this key, which you can do with:

gpg --edit-key [key-id]
# In the interactive session, run `trust`, select your trust level and finally run `save`

My flake already configured your git to enable commit signing using the key you specified earlier (even though it wasn't yet available at that point). Any new commits that you make from now on will be signed

Git credentials

Warning

I don't yet have a proper set up for git credentials handled, for now, you can just use the HTTPS based authentication with store credential helper. Like what's described below. This category will however be completely rewritten and moved to SSH keys once I have support for them ready in the flake.

git config --local credential.helper "store --file ~/.config/git/git-credentials"

Now, once you run git push, you will be asked for a password, which will get stored to ~/.config/git/git-credentials (in plain-text, though the file is protected by file-system permissions, and only the owner can read it).

Push to git

First, let's remove our temporary hack with git local configuration we used to allow us to make commits:

git config --local --unset user.name
git config --local --unset user.email

Now that you have git set up, let's ammend our previous commits, which will recreate it, and this time, git will use our global configuration with the gpg keys configured to sign the commits.

The following command will rebase all commits until we reach the main branch, from which we branched off, which means it will sign all commits in our temp branch:

git rebase --exec 'git commit --amend --no-edit -n -S' -i main

Now that our commits are signed, we're ready to merge and push:

git checkout main
git rebase temp
git push

Done! We've just managed to add a new host to my flake and push the config back to git. You can now use this machine to make any additional changes, whether that's host-specific ones or global ones.